Netgear GS108T and vlans

From HeepyWiki

Revision as of 23:51, 21 July 2012 by Morris (talk | contribs) (Created page with "1. Using the VLAN Membership screen, set up ports as tagged and untagged as you want. 2. ALSO set the vlan number as "PVID" for each port in "Port PVID Configuration." 3. ALSO in…")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

1. Using the VLAN Membership screen, set up ports as tagged and untagged as you want. 2. ALSO set the vlan number as "PVID" for each port in "Port PVID Configuration." 3. ALSO in System->Services->Interface Configuration, set "Trust Mode" to "Enabled" or else it will inexplicably filter DHCP responses from going out any port.

Retrieved from "https://www.heepy.net/index.php?title=Netgear_GS108T_and_vlans&oldid=1264"